Unibox Powered by Android TV™ -- User Manual

Please read this user manual before operating your Unibox.

Product Safety Notice

Unibox is manufactured to meet international safety standards. Follow the instructions below for safe operation.

Installation Notes

• Use only the provided power supply cable with the Unibox.
• Do not place the product on an unstable surface.
• Connect all other cables before plugging the power supply cable into the power outlet.
• Avoid overloading outlets or extension cords.
• Replace frayed power cords immediately.
• Keep the power supply accessible for disconnection.
• Ensure all cables are securely connected.
• Keep the device away from moisture and extreme conditions.

Usage Notes

• Keep liquids away from the box.
• Clean only with dry or damp cloth.
• Disconnect from power if unused for long periods.
• Avoid placing it near heat sources or open flames.
• Do not attempt to open the device or its power supply.

Accessory List

Ensure your package includes:

1. Unibox (x1) - Black rectangular streaming device
2. Remote Control (x1) - Black handheld remote with tactile features
3. Power Adapter (x1) - External power supply with regional plug
4. HDMI Cable (x1) - Cable for TV connection
5. User Manual (x1) - Printed guide
6. AAA Batteries (x2) - For remote control operation

Package Content Diagram

Hardware Structure

Top Panel

1. RCU pairing button
2. Power Indicator (LED light, shows green when Box is on, flashing green if the network connection is lost)

Right Side Panel

1. USB-C (power input connector)

Left Side Panel

1. HDMI Output (rectangular port for video/audio connection to TV)

Rear Panel

1. Ethernet (RJ45 network port)

Remote Control Overview

The remote control includes tactile bumps on the number 5 key and directional pad center button for ease of use by touch.

Detailed Remote Layout (described from top to bottom, left to right):

Row 1: STB Control button (left), STB Power button (right)

Row 2: Number buttons 1, 2, 3 (top row)

Row 3: Number buttons 4, 5 (with tactile bump), 6 (middle row)

Row 4: Number buttons 7, 8, 9 (third row)

Row 5: Search button (left), 0 (center), Source/Exit button (right)

Row 6: EPG button (left), Video on Demand button (center), Radio button (right)

Row 7: Directional pad - circular arrangement with tactile center

• Up (Menu Up)
• Left
• Center (OK button)
• Right
• Down

Row 8: Back button (left), Home button (center), Profile button (right)

Row 9: Volume controls and navigation

• Volume Up (left), N (NOVA) button (center), Channel Up (right)

Row 10:

• Volume Down (left), Voice assistant button (center), Channel Down (right)

Row 11: Media controls

• Rewind (left), Play/Pause (center), Fast Forward (right)

Row 12: Additional functions

• Teletext (left), All Apps (center), Sport (right)

Row 13: Color-coded function keys

• Red button (F1, leftmost), Green button (F2), Yellow button (F3), Blue button (F4, rightmost)

Technical Glossary

• EPG: Electronic Program Guide - displays TV schedule and program information
• STB: Set-Top Box control functions

Bluetooth Pairing

To pair your remote with the Unibox:

1. Press the pairing button on top of the Unibox
2. Place the remote-control unit 25 cm from the device
3. Press and hold the Volume Up and Channel Up buttons simultaneously for 3 seconds then release
4. If pairing fails, ensure the Unibox is powered on and within 25 cm of the remote-control unit

System Connection

Important: Turn off all devices before making connections.

Step-by-Step Setup

1. Connect to TV:
   1. Locate the HDMI port on your TV (usually labeled HDMI 1, HDMI 2, etc.)
   2. Connect the provided HDMI cable from the Unibox HDMI Output to your TV's HDMI input
   3. Note which HDMI port number you used
2. Connect to Power:
   1. Plug the power adapter into the DC IN port on the Unibox rear panel
   2. Connect the power adapter to a wall outlet
   3. The box will power automatically (power indicator will turn green)
3. Initial Setup:
   1. Turn on your TV and select the correct HDMI input source using your TV remote
   2. Follow the on-screen setup wizard instructions
   3. Use the remote's directional pad and Select button to navigate menus
4. Connect to Network (choose one method):

For Wireless Connection (Wi-Fi):

1. Navigate to Settings > System settings/ Network and internet> Wi-Fi using the remote
2. Select your wireless network name from the list
3. Enter your Wi-Fi password using the on-screen keyboard
4. The Wi-Fi indicator will turn white when connected

For Wired Connection (Ethernet):

1. Plug the network cable into the Ethernet port on the Unibox rear panel
2. Connect the other end to your router or modem

Connection Diagram

Troubleshooting

No Display Issues

• Verify HDMI cable is securely connected to both Unibox and TV
• Confirm TV is set to correct HDMI input source
• Try a different HDMI port on your TV
• Check that TV is powered on and functioning with other devices

No Sound Issues

• Confirm TV volume is turned up and not muted
• Check TV audio settings (some TVs default to internal speakers)
• Test with different content to isolate the issue

Network Connection Issues

• For Wi-Fi: Check signal strength, verify password is correct
• For Ethernet: Verify cable is securely connected and not damaged
• Restart your router/modem by unplugging for 30 seconds
• Move Unibox closer to router if using Wi-Fi

Remote Control Issues

• Not Responding: Replace batteries, ensure correct polarity (+ and - alignment)
• Range Issues: Ensure clear line of sight within 4 m of Unibox
• Pairing problem: repeat the Bluetooth pairing procedure
• Check for interference from other wireless devices

Device Not Powering On

• Verify power adapter is securely connected to both wall outlet and Unibox
• Try a different power outlet

Unibox Technical Specifications

• Model: CHMBX01
• Power Requirements: 5 V – 1.5 A
• Operating Temperature: 0℃ to 45℃

Regional Importers

• Greece: NOVA S.M.S.A., 10442 Athens

Battery Safety Warning

• Use only AAA alkaline or rechargeable batteries
• Do not replace batteries with incompatible types
• Do not dispose of batteries in fire or crush/puncture them
• Remove batteries if the device is unused for extended periods
• Avoid exposure to extreme temperatures or low-pressure environments
• If batteries leak, clean the battery compartment thoroughly before inserting new batteries

Accessibility statement

This product adheres to the concept of universal design and is committed to providing a convenient and stable user experience for people with disabilities. This section details usage guidelines to help users with different types of disabilities quickly confirm the compatibility of products with their own auxiliary tools.

Product accessibility

Text to speech function

The product has embedded Text to speech function, and default set is Off.

Go to the “Home - Settings - System settings - Accessibility -Text to speech” or press the LEFT/RIGHT key to switch it on or off. To adjust volume, press the VOL+ or VOL- key. When the Text to speech function is on, the STB will read the content where the cursor stays.

Talk back function

The product has embedded Talk back function, and default set is Off.
Go to the “Home - Settings - System settings - Accessibility - Talkback (Screen reader)” or press the LEFT/RIGHT key to switch it on or off. To adjust the volume, press the VOL+ or VOL- key. When the Talk back function is on, the STB will read the content of focused UI element.

High contrast text function

The product has embedded High contrast text function, and default set is Off.
Go to the “Home - Settings - System settings - Accessibility - High contrast text” or press the LEFT/RIGHT key to switch it on or off.

Text scaling function

The product has embedded Text scaling function, and default set is Default i.e. scale to 100%. Go to the “Home - Settings - System settings - Display & Sound - Text scaling”. Select the desired text scaling option by pressing the UP/DOWN key.

Color correction function

The product has embedded Color correction function, and default set is Off. Go to the “Home - Settings - System settings - Accessibility - Color correction” or press the LEFT/RIGHT key to switch it on or off. Select the desired color correction option by pressing the UP/DOWN key.

Captions function

The product has embedded Captions function, and default set is Off. Go to “Home - Settings - System settings - Accessibility – Captions” or press the LEFT/RIGHT key to switch it on or off. Select the desired captions option by pressing the UP/DOWN key.

Audio description function

The product has embedded Audio description function, and default set is Off. Go to the “Home - Settings - System settings - Accessibility - Audio description” or press the LEFT/RIGHT key to switch it on or off.

User manual access

This user manual is available in the following formats to meet the reading needs of different users:

• This electronic version (supports screen readers)
• Printed version that may be offered upon request

Special Note

There are no physical/virtual keyboard interfaces, third-party software downloads are not supported, and all functions can be easily operated through accessibility mode.

If accessibility barriers are encountered, please contact Customer service of your service provider.

© 2025 Unibox. All rights reserved.